Wifirobin for Free Wifi

WiFi signals are available almost everywhere but most of them are useless to us as they are Secured connections that required a password to access. And most WiFi Adapters in the market and in Laptops have a range of only 20 to 30 meters, limiting the number of WiFi connections available to you.

WiFi Decoder is a powerful 1000 MW Long Range USB WiFi Adapter that can access WiFi connections up to 2 km away!

Wifirobin optimized the cracking of WEP encryption,the optimization makes the hack more quickly.

Best of all it can also decode, hack, crack, unlock and reveal the passwords of most of the secured connections. It will let you use the internet almost everywhere for free thereby saving your hefty monthly subscription fees.

You only need to decode the password of each connection once and use them forever as the administrator almost never change the password. And they will not know that someone else is sharing the connection! Now you can enjoy Free WiFi almost anywhere with dozens of connections to choose from and save hundreds of dollars every year!

FEATURES:                                                                                                            

      + Data Transfer Rate Up to 54Mbps

　　+ WiFi Adapter. Range: up to 2km

　　+ Frequency Range 2.400GHz-2.484GHz

　　+ Wireless Connector 5dBi

　　+ Standard IEEE 802.11b/g

　　+ No AC adapter needed, works when connected to any USB port

　　+ Support any common operating systems, including Windows 98SE, ME, 2000, XP, Vista, Linux, Mac.

More infomation and Firmware upgrade instruction                                            

　　2.4 GHz SUPER WIRELESS TERMINAL

　　User manual V1.77

　　Part One:Product Description

　　The complete packaging includes following:

　　One 2.4GHz Super wireless terminal

　　One USB line

　　One warranty card

　　Part Two:Product feature

　　?Meet IEEE802.11b/g standard, use OFDM technique, the actual data rate can be reached as high as 20Mbps or above

　　?Support 3G wireless router, wireless AP and wireless client server

　　?Support Bridge and Router mode

　　?LED screen, automatically search wireless signal , one key connecting.

　　?No installation of the driver and software are needed.

　　?Support 54/48/36/24/18/12/9/6M or 11/5.5/2/1M rate adaption

　　?Support SSID broadcast control and MAC visit address control

　　?Support 64/128/152 WEP encryption, support WPA.802.1X,TKIP,AES encryption and security mechanisms.

　　?Built-in firewall, support IP address filtering, domain filtering and MAC address filtering

　　?Support for UPNP and DDNS dynamic domain function

　　Device Address

　　Default IP address: 192.168.4.20

　　User name: admin

　　Password: admin.

　　Part Three

　　LCD CONFIGURATION

　　INTERFACE

　　Turn on the device, connect the antenna, network cable, then plug in, after the power indicator light, LAN light and AIR lighter are on, the ANTCOR welcome screen will be shown.

　　SCREEN MENU

　　After you press the button ‘OK’, the menu is displayed as follow,

　　Device information

　　As to the device information, please take a look at the software version, IP address.

　　Wireless network information

　　Display the signal strength for the wireless network connecting

　　Wireless network scan

　　IVS：

　　Successful information displayed：

　　Press ‘OK’ button, it will automatically scan the wireless signals around.

　　Wait for a while, a list of the information will be searched as follow,

　　Above information stands for SSID, encryption method and signal strength

　　For example, the fourth line, ant stands for SSID, OPN stands for encryption methods, 16 stands for signal strength.

　　The results LV7AP：

　　IVS：

　　Successful information displayed：

　　Failure information displayed：

　　Part FourRestore the factory settings

　　Select the restoring factory settings, press OK to restore the factory default, the default address is 192.168.4.20, user name: admin, password: admin

　　Part Five

　　WEB PAGE CONFIGURATION

　　Local IP address setting

　　Choose Network Neighborhood, local area connection properties/General/ Internet (TCP/IP), fill in the IP 192.168.4.XX, see picture below

　　Login setting

　　Open IE browser, input 192.168.4.20, click enter button, you will see a window, type the default user name: admin and password: admin, click sure key.

Wireless mode introduction                                                        

1. Link setup

　　Wireless Mode: choose Station

　　ESSID: click Selection button and choose Station

2. Wireless security setting

Setting steps

1.Set up Main, follow the picture below.

2. Link setup>Wireless Mode>choose Station

3. Network setting> Network Mode: choose Router

　　Finish booting the device, wait to connect with the router, get your network.

4. Apply changes

5. Restarting:

　　Finish booting the device, wait to connect with the router, get your network.

　　WiFi access points appears SSID “Robin”:

　　How to change Repeater ESSID

　　You can change the default name of Repeater ESSID: WFB-XXXX to a name you want on the page Link Setup. This step prevents other people from using the network hacked by wifirobin. We take TENDA network as an example, the network which has been hacked was named WFB-TENDA as default Repeater ESSID but without initial key as the following image:

　　Well, you must change the name WFB-TENDA to avoid the user of TENDA knowing that his/her network has been hacked. Besides, it is better to set keys by the following steps to keep others from using the hacked network:

　　Rename Repeater ESSID(here we change it to Robin, you can change to the name you want), enter wpa keys (here we use wifirobin, you can select the keys you like)

　　Click the button ¨Change¨ at the bottom of the page.

　　After clicking ¨Change¨, appears at the top of the page, “Configuration contains non-applied changes. Apply these changes?¨ Click ¨Apply.¨

　　Wait a minute, after wifirobin restarting, setting will be reserved successfully. Then in the list of

............................................................................................................................................................................

Firmware upgrade instruction： network cable                                    

1. Go to ‘’ System’’ setup page, see below picture　：

2. Click , you will see the window below：

3. Click ‘’ Browse’’ button, choose the file ‘’ fw.bing’’ that I sent you

[v1.25wifirobin] 4. Open it then click ：

5. Click ，upgrading the firmware.

6.Wait for a couple of minutes untill the device reboots, then succeed in upgrading.

Pay attention to below two points：

　　1)Do not change the file name ‘fw.bin’, leave as it is.

　　2)During the firmware upgrading, make sure wifirobin has power, don’t cut the power supply and make sure to connect to the 。

　　After rebooting the device, now do a simple operation on wifirobin LED screen, choose ‘‘factory reset’’ option, wait for some seconds, reboot it again. Upgrade succeeded.

To learn more please visit the official website: http://www.wifirobin.com/

　　? All Wifirobin purchased from us are 100% test, And 100% work